1. Terms & Conditions for Quotation Acceptance (V1 September 2025)

Disclaimer: The following terms and conditions have been prepared as a general template for the sale of goods and services. While they are designed to be comprehensive, they are for informational purposes only and do not constitute legal advice.

This Agreement is made between Matthew Walker, a sole trader trading as TEKIE, with the business address at White Horse Enterprise Centre, Ascot Court, Trowbridge, Wiltshire, BA14 0XA, and website www.tekie.co.uk ("Us," "We," "Our," or "the Company"), and the Client ("You" or "Your").

1. Definitions

  • "Quotation" means the formal document issued by Us, which details the scope of Works, pricing, and project timeline.
  • "Proposal" means the document issued by Us prior to the Quotation, outlining a general approach and initial estimates. A Proposal is not a binding offer.
  • "Agreement" refers to the complete Contract between You and Us, consisting of these terms, the Quotation, the Proposal, and any relevant Purchase Order.
  • "Contract" means this Agreement, which constitutes the binding legal arrangement.
  • "Parties" refers collectively to You (the Client) and Us (the Company).
  • "Purchase Order" means a commercial document issued by the Client to Us, authorizing a purchase of Goods or Services.
  • "Works" means the collective Services, products, and labour to be supplied by Us as detailed in the Quotation, Proposal, and any other written communication, including email.
  • "Goods" means the products, materials, and equipment supplied by Us as part of the Works.
  • "Service," "Services" refers to the labour and expert activities performed by Us as part of the Works, including but not limited to Installation, configuration, fault-finding, and any other on-site or off-site assistance.
  • "Installation" means the portion of the Works carried out on-site, including the act of placing, positioning, and connecting the Goods at the Site.
  • "Site" means the location where the Works are to be performed.
  • "Subcontractor" means any third party engaged by Us to perform a portion of the Works on Our behalf.
  • "Waiting Fee" means a charge at Our Standard Day Rate for time lost due to delays caused by You.
  • "Standard Day Rate" means Our current daily rate for an engineer, which will be communicated to You upon request.
  • "Maintenance" means the scheduled or ad-hoc servicing, inspection, or upkeep of the installed system.
  • "Support" means any technical assistance provided by telephone, email, or on-site visit after the initial Installation has been completed and accepted.
  • "Hazards" means any on-site conditions, substances, or situations that pose a risk to the health, safety, or well-being of Our employees or Subcontractors.
  • "Debt" means any overdue amount owed to Us by the Client under this Agreement.

2. Entire Agreement

This Agreement, along with the attached Quotation, constitutes the entire agreement between the Parties and supersedes all prior and contemporaneous understandings. It is expressly agreed that this Agreement and the terms set out herein shall prevail over any terms and conditions contained in any document submitted by the Client, including any Purchase Orders.

3. Acceptance of Quotation

By accepting this Quotation, You are agreeing to the Proposal, scope of the Works, pricing, and terms herein. Acceptance can be made via clicking the accept button, a signed copy of the Quotation, a formal Purchase Order, or a clear written confirmation (e.g., email). This acceptance signifies the formation of a binding Agreement.

4. Scope of Work and Product Availability

This Quotation outlines the specific Services, products, and deliverables included. All prices are valid for 7 days from the date of issue. After this period, We reserve the right to revise the Quotation accordingly.

5. Supply of Goods

5.1. Risk of Loss

The risk of loss or damage to the Goods shall pass from Us to You upon delivery of the Goods to the Site. From that point on, You shall be solely responsible for their safekeeping.

5.2. Inspection and Acceptance

You must inspect the Goods upon delivery and notify Us of any defects, damage, or discrepancies within 48 hours. If no such notification is received, the Goods shall be deemed to be in a satisfactory condition and accepted by You.

5.3. Direct Shipping of Goods

In the event that Goods are shipped directly to the Client prior to the commencement of the Works, the risk of loss or damage to those Goods shall pass to the Client upon delivery by the courier. The Client is responsible for inspecting the Goods within 48 hours of receipt and notifying Us of any damage, defects, or discrepancies. If no notification is received, the Goods shall be deemed in a satisfactory condition and accepted by the Client.

5.4. Procedure for Faulty Goods

Should You notify Us of a defect within the specified 48-hour period, We will, at Our discretion, either repair or replace the faulty Goods. Our liability is limited to this remedy, and We are not obligated to offer a refund, unless required by law.

5.5. Warranty

We pass on to You any warranty that the manufacturer of the Goods may provide. We do not provide any separate product warranty on the Goods themselves.

5.6. Charges for Non-Warranty Work

Any request by the Client for repairs, replacements, or additional Works related to Goods or Services that are not covered by the manufacturer's warranty or by a separate written warranty provided by Us will be subject to a separate Quotation and will be charged at Our standard labour rates and parts costs.

6. Right to Amend Proposal

6.1. Product and Material Availability

All products and materials specified in the Quotation and Proposal are subject to availability. In the event that a specific Good becomes unavailable or its supply is delayed, we reserve the right to propose a suitable alternative of equal or better quality, performance, and value. We will provide written notification to you detailing the proposed alternative and any associated change in cost. The Installation of the alternative Good will only proceed upon your express written consent (including email confirmation), at which point this Agreement will be considered amended. Any agreed-upon change in price will be reflected in an updated Quotation or invoice. If a mutually acceptable alternative or change in cost cannot be agreed upon, either Party may terminate this Agreement, with the Client remaining liable for any reasonable costs and losses incurred by Us up to the point of termination.

7. Ownership of Goods

Ownership of the Goods shall not pass to You until We have received full and cleared payment for the Works from You. The risk of loss or damage to the Goods, however, shall pass to You upon delivery to the Site.

8. Pricing and Payment Terms

The total price for the work is as stated in the Quotation. All prices are valid for 7 days from the date of issue. After this period, We reserve the right to revise the Quotation. By accepting this Quotation, You agree that these payment terms are the agreed-upon and final terms. Regardless of any other payment terms You may have for paying invoices, You agree to waive Your own payment terms and accept this as the only agreed-upon payment terms. It's also important to note that all costs associated with the job, including any cancellation fees, are subject to VAT (Value-Added Tax).

8.1. Advanced Payment

An advanced payment is required upon acceptance of this Quotation. This payment, as specified in your quotation email and Proposal, covers the cost of the Goods. The payment of this advance constitutes a commitment by you to purchase the specified Goods, subject to your Right to Cancel within the 14-day cooling-off period as detailed in Section 9. Upon acceptance of this Quotation, an invoice for the advanced payment will be sent and is due upon receipt to ensure your Goods can be ordered immediately to prevent any delays. This is a separate payment from the final invoice for the remaining balance of the Works. Failure to pay the advanced payment within this timeframe will mean we cannot order the Goods, and the Works will be terminated with you remaining liable for any costs incurred, as detailed in Section 10.

8.2. Final Invoice and Late Payments

The final invoice will be issued upon completion of the work. For a payment to be considered received, we must have cleared funds in our bank account or cash by the due date. Payment is due within 7 days from the invoice date (NET 7). If the full balance is not received by this date, a fee of 8% of the total invoiced amount will be applied to the final invoice on the 8th day.

8.3. Late Payment (Business Clients)

For invoices issued to a business Client, We reserve the right to charge, and You agree to pay, interest on any overdue amount at a rate of 8% per annum above the Bank of England's base rate. In addition, and in accordance with the Late Payment of Commercial Debts (Interest) Act 1998, a fixed sum for the cost of recovering the debt will be applied to all overdue invoices. The amount of this fee is £40 for debts up to £999.99, £70 for debts between £1,000 and £9,999.99, and £100 for debts of £10,000 or more.

8.4. Late Payment (Private Clients)

For invoices issued to a private Client, if payment is not received by the due date, an administration fee of £45.00 will be applied to the overdue balance to cover Our reasonable costs in pursuing the late payment.

8.5. Debt Recovery

If any invoice remains unpaid for more than 14 days beyond its due date, We reserve the right to engage a third-party debt collection agency to recover the outstanding Debt. The Client shall be liable for all costs incurred in the collection of such Debt, including but not limited to legal fees, collection agency fees, and all administrative costs associated with the recovery.

9. Right to Cancel (14-day cooling-off period)

9.1. Application of the right to cancel

This right to cancel applies exclusively to private Clients and not to business Clients.

9.2. Your right to cancel (for private Clients only)

As a private Client, You have the right to cancel this Contract within 14 days without giving any reason, provided the Contract was made at a distance (e.g., online or by telephone) or off-premises (e.g., in your home). This right applies to both the supply of Goods and the Installation Service.

9.3. How the 14-day period is calculated

The cancellation period is measured in different ways for Goods and Services:
For Goods: The 14-day cooling-off period begins the day after You, or a person identified by You, receive physical possession of the last of the Goods.
For Installation Services: The 14-day cooling-off period begins the day after the Contract for the Service is entered into.

9.4. How to cancel (for private Clients only)

To exercise your right to cancel, You must inform us of your decision by a clear statement before the cancellation period has expired. You can do this by:
Post: TEKIE, White Horse Enterprise Centre, Ascot Court, Trowbridge, BA14 ΟΧΑ
Email: hello@tekie.co.uk
Using the model cancellation form: You may, but are not obligated to, use the model cancellation form provided at the end of these terms and conditions.

9.5. What happens if a private Client cancels

  • Cancellation before Services begin: If You cancel the Service Contract before we have started the work, You will receive a full refund of all payments made to us.
  • Cancellation after Services begin at your request: If You requested that the Service begin during the cancellation period and then cancel, You will be liable to pay for the Service that was provided up to the point of cancellation. We will deduct a proportionate amount for the work already completed and for any reasonable costs incurred.
  • Refund for goods: If You cancel the Contract, we will reimburse all payments received from You, including the costs of standard delivery (if applicable). You will be responsible for the cost of returning the Goods to us unless we have agreed to cover this expense.
  • Refund timing: We will issue your refund within 14 days of receiving the returned Goods or proof of their return.

9.6. Return of goods after cancellation (for private Clients only)

If You cancel the Contract, You must return the Goods to us without undue delay and in any event no later than 14 days from the day on which You communicate your cancellation.

9.7. Condition of returned goods (for private Clients only)

You are liable for any diminished value of the Goods resulting from the handling other than what is necessary to establish the nature, characteristics, and functioning of the Goods. For items that have been installed and cannot be removed without damage, the right to cancel for those specific items may be lost or a reduction in your refund may apply.

9.8. Exclusions of cancellation right

Your right to cancel may not apply in certain circumstances, such as Goods made to your specific requirements or urgent repairs You explicitly requested.

10. Cancellation After 14-Day Cooling-Off Period and Termination

10.1. Our Right to Charge

In the event that the Client cancels the Agreement for any reason after the 14-day cooling-off period has expired, or the Works are suspended or terminated due to your refusal to agree to revised costs, the Client shall be liable for a cancellation fee.

10.2. Calculation of Cancellation Fee

This fee will be based on Our reasonable costs and losses incurred as a result of the cancellation. The fee will include, but is not limited to:

  • The advanced payment for the Goods, which is non-refundable after the 14-day cooling-off period.
  • The cost of any additional Goods, materials, or equipment that have been ordered or procured by Us for the Works.
  • A fee for any labour or Services already performed, including design, planning, or administrative work.
  • Any reasonable costs associated with Our returning ordered Goods to Our supplier, including restocking or handling fees.

10.3. Payment of Cancellation Fee

An invoice for the final cancellation fee will be issued to the Client and is due within 7 days of the invoice date.

10.4. Effect of Termination

If the Works are terminated due to the Client's actions or failure to comply with the terms of this Agreement, the Agreement shall be considered immediately and permanently ended. The Client remains liable for all costs incurred by Us up to the point of termination. Any future request for the same or similar Works will require a new Quotation and a new Agreement to be accepted by both Parties.

11. Intellectual Property Rights

All intellectual property rights, including but not limited to copyrights and design rights, in any drawings, designs, or technical documents created by Us as part of the Works or Proposal shall remain Our exclusive property. You may not reproduce, copy, or use such documents for any purpose other than for the Works, without Our express written consent.

12. Governing Law

This Agreement shall be governed by and construed in accordance with the laws of England and Wales. Any disputes arising from this Agreement shall be subject to the exclusive jurisdiction of the courts of England and Wales.

13. Limitation of Liability

To the fullest extent permitted by law, Our total liability for any claims, damages, or losses arising out of or in connection with this Agreement or the Works shall not exceed the total price paid by the Client for the Works. We shall not be liable for any indirect, special, or consequential loss or damage, including but not limited to, loss of profits, loss of business, or any other financial loss, whether arising from a breach of Contract, negligence, or any other cause.

14. Force Majeure

We shall not be liable for any failure or delay in the performance of our obligations under this Agreement if such failure or delay is caused by an event beyond our reasonable control ("Force Majeure Event"). A Force Majeure Event includes, but is not limited to, acts of God, war, terrorism, government action, pandemics, strikes, labour disputes, supply chain disruptions, or natural disasters. In the event of a Force Majeure Event, We will notify you promptly and will use all reasonable endeavours to mitigate the effect of the event. Our time for performance will be extended for a period equivalent to the delay caused by the Force Majeure Event.

15. Confidentiality

15.1. Confidential Information

Both Parties agree to keep confidential all non-public information, including but not limited to business plans, financial information, technical data, designs, pricing, and customer information, obtained from the other Party during the course of the Agreement.

15.2. Obligation of Confidentiality

Neither Party shall, without the prior written consent of the other, disclose the confidential information to any third party, except as required by law. Both Parties will use the same degree of care to protect the confidential information as they use to protect their own confidential information of a similar nature.

16. Data Protection

We will handle your personal data in accordance with our Privacy Policy. For full details on how we collect, use, and protect your data, please refer to our Privacy Policy available on our website at https://tekie.co.uk/privacy-policy.php.

Model Cancellation Form (For Private Clients Only)

(Complete and return this form only if you wish to withdraw from the Contract)

To: TEKIE, White Horse Enterprise Centre, Trowbridge, BA14 0XA.
Email: hello@tekie.co.uk

I/We hereby give notice that I/We cancel my/our Contract of sale of the following Goods and/or for the supply of the following Service:

Quotation Number: QU-______________________
Ordered on / received on: ______________________
Name of Client(s): ______________________
Address of Client(s): ______________________

Signature of Client(s) (only if this form is notified on paper): ______________________
Date: ______________________

2. On-Site Service Terms (V1 September 2025)

Disclaimer: The following terms and conditions have been prepared as a general template for the sale of goods and services. While they are designed to be comprehensive, they are for informational purposes only and do not constitute legal advice.

These terms are an addendum to the main Terms and Conditions for Quotation Acceptance and are governed by that Agreement. All defined terms, such as "Works" and "Site," shall have the same meaning as set out in the main Agreement.

1. Project Timelines & Delays

We will make every reasonable effort to complete the Works within the agreed-upon timeframe. However, the quoted timeline may be revised in the event of delays, and the following will apply:

1.1. Delays Caused by You

The quoted cost of the Installation may be revised if you want the work carried out more urgently than agreed, if you change the system Proposal, or if your premises are in some way unsuitable for the Installation to be completed as described in the Proposal for reasons that were not apparent during the original survey.

1.2. Delays Caused by Us

We shall not be liable for any delays in the performance of the Works that are due to circumstances beyond Our reasonable control, including but not limited to supply chain disruptions, product availability, transport delays, or employee sickness. In such an event, We will communicate the delay to you promptly and work with you to agree on a new, reasonable schedule. You agree that We will not be liable for any indirect or consequential losses (such as loss of income, profits, or business) that you may incur as a result of such delays.

1.3. Unforeseen Delays

Any unforeseen issue that occurs, for example, but not limited to, a cable route not being accessible, may result in extra time or materials. Any extra costs arising from such issues will be discussed and agreed upon with you before we continue the Works. If you do not agree to the revised costs, we reserve the right to suspend or terminate the Works in accordance with the main Agreement and may be unable to complete the Installation as originally proposed.

2. Use of Subcontractors

We reserve the right to use qualified and experienced Subcontractors to perform any part of the Works. You agree to accept the performance of the Works by such Subcontractors as if they were performed by Us. Our use of Subcontractors will not affect the pricing or the terms of this Agreement.

3. Post-Installation Support & Maintenance

The Quotation and payment for the Works cover the initial supply and Installation only. Any future service calls, Maintenance, repairs, or Support required after the Installation is complete are not included in this Agreement. All such future Services will be subject to a separate Quotation and will be charged at our standard rates.

4. Limitation of Liability for Security Systems

Any security system, including but not limited to CCTV, alarms, and access control systems, is installed as a deterrent only. We provide no guarantee or warranty that the system will prevent or deter any form of breaking and entry, theft, burglary, or other criminal activity. You acknowledge that a system may be subject to compromise, circumvention, or failure. We shall not be liable for any loss, damage, injury, or consequential loss to your property or person resulting from a breach of security, even if the security system fails to operate, is circumvented, or breaks down for any reason. Our liability is limited to the repair or replacement of a faulty system component under warranty as per Section 6.

5. Final Inspection & Acceptance

5.1. Inspection & Reporting

Upon completion of the work, our on-site engineer will give you a full briefing and demonstration of the system. You are required to inspect the completed Works and notify our engineer of any defects, issues, or damage you believe to have been caused by us before our team leaves the Site.

5.2. Acceptance & Liability

Unless we are notified of any such issues or damage on-site, the Works will be deemed to have been completed to a satisfactory standard and accepted by you. The Company's liability is strictly limited to new damage caused directly by our operatives during the Installation and does not extend to any pre-existing damage or issues on the Site.

6. Warranty on Workmanship

We warrant that the Works will be performed with reasonable care and skill. In the event of a defect in the workmanship of the Installation, we will, at our discretion, either repair or re-perform the defective portion of the Works at no cost to you, provided that we are notified of the defect within 12 months from the date of completion. This warranty does not cover defects or damage caused by misuse, unauthorized modifications, or neglect.

7. Your Obligations Prior to Installation

To enable us to successfully install the system, you must:

7.1. Obtain Necessary Consents and Licenses

Obtain and pay for all necessary consents and licenses (e.g., a landlord's consent). By signing the Contract, you guarantee that you have the full authority to allow us to install and maintain the system and that no other consents are required.

7.2. Provide Access to Premises

Give us free access to the premises on the agreed-upon date and time and arrange for easy access to all working areas and surfaces.

7.3. Site Access and Waiting Time

You are responsible for ensuring the Site is prepared and ready for work to begin on the agreed-upon date and time. If we are unable to start or continue work due to your failure to provide access, a prepared Site, or because of delays from other trades, we reserve the right to charge a Waiting Fee at our Standard Day Rate.

7.4. Health & Safety

You are responsible for ensuring the Site is safe and free from Hazards for our team. We reserve the right to suspend the Works if, in our reasonable opinion, the Site is unsafe. Any costs incurred due to such a suspension will be your responsibility.

7.5. Provide Power Supply

If a power supply is required for the Works, the details will be outlined in the Proposal. It is your responsibility to ensure that an adequate power supply is available as set out in the Proposal, unless we have been asked to provide this as part of the Works. In such a case, the provision of power will be detailed in the Quotation and will be installed by our chosen qualified electrical Subcontractor.

7.6. Disclose Concealed Services

Advise us of the existence of any known concealed water, gas, electricity, telephone, or other Services and point out their location to our engineer before work commences. We will use reasonable skill and care in identifying any Services not pointed out. We will only be liable for damage to these Services to the extent that we have not taken such reasonable care. We will use tools available to us to assist with identifying such Services.

7.7. Responsibility for Floorboards and Carpets

Be responsible for lifting any floorboards or floor coverings, including carpets. We cannot be held responsible for any damage as a result of lifting and re-fitting carpets or for any proposed flush fitting of units and making good thereafter.

7.8. Client's Equipment

If you wish us to use any existing equipment, it will be assumed to be in full working order. If we discover this is not the case during Installation, any work required to bring the equipment to an acceptable standard will be charged on a time and materials basis, but only after your full Agreement.

7.9. Disclose Possibility of Damage

Where damage could be caused that may not be immediately apparent to our operatives, we cannot be held liable if you have not notified us of such a possibility.

7.10. Client's Personal Devices

For system setup and final handover, the client must ensure that a suitable personal device (e.g., smartphone, tablet, or laptop) is available and accessible for the installation of any necessary applications or software.

8. Your Obligations Post-Installation

It is your responsibility to refit any floorboards, carpets, or other floor coverings that you lifted before Installation and to carry out any necessary building work, cutting, or decoration, unless specifically stated in the Quotation and/or Proposal. This does not apply to work required due to our failure to exercise reasonable care and skill.

9. On-site Amendments

In the event that an unforeseen issue or change is required on-site, any resulting change to the scope of the Works will be managed in accordance with Section 6.1 (Product and Material Availability) of the Terms and Conditions for Quotation Acceptance. This may include changes to materials, costs, or the project timeline.

Message Sent Successfully

We will be in touch soon.

Get In Touch

Let us know what you need and we'll get back to you shortly.